積み上げられた石 is the most natural and one of the oldest building materials. It’s been used for centuries in various projects both inside and outside your home. Stack Stone Panels can be a great choice for many reasons: it lasts forever, it offers a wide range of colors to choose from, and it can add beauty to any space you put them in.
What is Stacked Stone
積み上げられた石 as know as Ledge Stone, Ledger Panel, Stone Veneer Cladding, Cultured Stone, Stacked Stones panels, Stacked Stone Ledger Panels, Natural Stone Veneers, Ledgestone Wall Panels, Ledger Stone Veneer, ledger stone, Stone cladding, Stone Veneers, Natural stone cladding, Wall cladding, Stone wall panels, Stone panels, Slate veneer, etc.
A natural and timeless look for your home is the best way to describe stacked stone wall cladding. This type of landscaping offers a unique, different appearance that you can’t find with any other material or style. The good thing about this type of design is that it’s versatile and can be applied in many different ways. Let’s take a closer look at what exactly it entails, as well as some ideas on how to apply it!
Where You Can Use Stacked Stones
One of the best ways to add texture to your home design is to use stacked stones. These are natural stones that are installed in the way you would install a tile. The best part is that you can use a stacked stone for any design style.
You can use the stacked stones ledger panels outdoors and indoors because it is the ideal material to create a feature wall. For example, you can create a feature wall around your fireplace, in the foyer, bathroom, or use it as a backsplash in your kitchen.
On the other hand, you can also use it to highlight the exterior of your homes, such as the columns, chimney, front door, and much more. So, if you are looking to install this material in your home, you have come to the right place.
Installation Of Stacked Stone
Whether you are a professional or a homeowner who has taken up a DIY project, you can follow the below steps to install stacked stones veneer in your home exterior or interior.
Get All Your Tools
Once your substrate board has been put in place, you need to get all your tools together. This is so that you can start with the process immediately and finish it in less time. Here are all the tools you need to set up a stacked stone wall in your house:
- Angle grinder
- Mixing bucket
- Pencil
- Trowels
- Straight edge
- Measuring tape
- Stacked stones
- Adhesive powder
- Water
Besides these essential materials, you should keep all safety equipment in mind. For instance, it is good to wear earmuffs and safety goggles when cutting a ledge stone.
Keep the substrate area clean
When laying out stacked stones veneer panels, the first thing to do is to clean the substrate area. After that, you should apply an outdoor silicon substance on the edges of the board. This will close any gaps between the wall and the substrate attached to it.
Keep in mind to scrape off the excess product by using an ice cream stick. It is the best way to remove the fluid without spreading it.
Mix The Primer
A key thing to remember when laying out stacked stones veneer is that you will have to apply a primer on the substrate wall. However, note that you have to dilute the product first using water.
Typically, the packs of primer come with instruction manuals. You should check the one with your product to get the proper ratios. Once you know them, you should pour the water into a bucket and add the primer.
Apply The Primer
Now that you have made the mixture, you must apply it to the substrate board. Using a wide paintbrush is the best way to do this, as it allows you to cover a greater surface area. A roller is another tool that can help you apply the primer with ease.
You should keep in mind to apply the primer on the whole substrate at once. Typically, it will take fifteen minutes for the surface to dry. You mustn’t start laying out the stacked stones ledger panels unless the board is entirely dry.
Lay The Stacked Stones Panels
Stacked stones ledger panels are made from natural stone, so they differ in texture, thickness, and size. This is why you must lay out a row of stacked stones against the substrate. Keep in mind not to apply any adhesive on them.
The purpose of laying out dry stones is to get the best look for your wall. You can try putting the pieces in different angles to select the proper appearance. Once you know what look you want, you can start with the permanent application.
Cut The Stacked Stone Veneer
When you lay stacked stones tile on the wall, you will notice that the last piece will be longer than the substrate. This is why you will need to cut it in the correct size. You can do this by placing the ledge stone on the wall and using measuring tape to mark the appropriate cutting point. Then, you can make the cut with the angle grinder.
Mix The Adhesive
Now that all your material is ready, you should mix the adhesive by putting the powder in the bucket it comes with and adding water. You must ensure that the resulting mixture has the consistency of toothpaste. This will allow smooth application.
Again, note the adhesive package will have an instruction manual. You should use that for the mixing ratios. Sticking to the proper measurements will help you get the right consistency.
Apply The Adhesive
Pick up the trowel and place it in the adhesive bucket to get the paste. Then apply this to the bottom of the substrate. Keep in mind to put only enough adhesive for the first row of the stacked stone walls.
You may want to apply the adhesive on the back of the stacked stone veneer instead. While there is no harm in doing that, we suggest you don’t. This is because the process will be cleaner, and placing will be easier by applying the adhesive on the wall.
Attach The Stacked Stones on the wall
Now that you have put the glue, you should start attaching the stacked stones panels. When you are done with the first row, work your way upwards and put more adhesive as you go.
A stacked stone tile comes in different variations, so don’t worry about an off-centered look when making overlaps. Just lay the stones as they are to get a natural result.
Lay The Top Row
When you reach the top row, you will find uneven space on the substrate. Thus, you will have to cut the stacked stone panels to the right size. Once you do that, apply adhesive on the back of the stone. This will make the attaching process easier for the top.
After you have attached all the stacked stones, you should use a cloth to wipe any mess on the edges. Next, you should let the wall dry, and you will be done.
related to:
最後の言葉
This is your complete guide to stacked stone and its application. They come in different variations. For instance, you can get a cultured stone or a ledge stone for your house. Once you have the stacked stones, you can use the earlier application process to easily create a new wall.
Note: Please inspect all stacked stone panels before installation. Natural stone products inherently lack uniformity and are subject to variation in color, shade, finish, etc. It is recommended to blend stacked stone tiles from different boxes when installing.
として China manufacturer, exporter, and factory of culture stone, ledge stone, stacked stone veneer, Welcome to feel free to お問い合わせ any time.
